当前位置:毕业生轻松求职网公文频道合同范本技术合同国际技术转让加设备进口合同
国际技术转让加设备进口合同

国际技术转让加设备进口合同

01-30 00:46:16  浏览次数:498次  栏目:技术合同
标签:技术开发合同,技术咨询合同,http://www.qiuzhi56.com 国际技术转让加设备进口合同,http://www.qiuzhi56.com
within _________ months from the effective date, the suppliershall submit the relevant standards, codes and its list to the buyer.
21.3approval of technical documents by buyer
21.3.1the supplier shall prepare (or cause its sub- contractors toprepare)and furnish to the buyer the documents listed in appendix 7-3(documents for approval by the buyer)hereto for its approval asspecified.
any part of the works covered by or related to the documents to beapproved by the buyer shall be executed only after the buyer's approvalthereof.
21.3.2within fourteen (14)days after receipt by the buyer of anydocument requiring the buyer's approval in accordance with article 21.3.1above, the buyer shall either return one copy thereof to the supplier withits approval endorsed thereon or shall notify the supplier in writing ofits disapproval thereof and the reasons therefor and the modificationswhich the buyer proposes. if the buyer fails to take such action withinthe said fourteen (14)days, then the said document shall be deemed tohave been approved by the buyer.
21.3.3the buyer shall not disapprove any document except on theground that the document does not comply with some specified provision ofthe contract or that it is contrary to good engineering practice.
21.3.4if the buyer disapproves the document, the supplier may eithermodify the document and resubmit it for the buyer's approval in accordancewith article 21.3.2 above, or may dispute the disapproval in accordancewith article 21.3.5 below. if the buyer approves the document subject tomodification(s), the supplier may either accept the modification(s),whereupon the document shall be deemed to have been approved, modify thedocument and re-submit it for the buyer's approval in accordance witharticle 21.3.2 above or dispute the modification(s)in accordance witharticle 21.3.5 below.
21.3.5if any dispute or difference shall arise between the buyer andthe supplier in connection with or arising out of the disapproval by thebuyer of any document and/or any modification (s)thereto which cannot besettled between the parties within a reasonable period, then such disputeor difference may be referred to an expert for determination in accordancewith article 7.2 (reference to expert)hereof. if such dispute ordifference is referred to an expert, the buyer shall give instructions asto whether or not and, if so, how the works are to proceed. the suppliershall proceed with the works in accordance with the buyer's instructions,provided that if the expert upholds the supplier's dispute of thedisapproval and if no notice has been given by the buyer under article7.2.3 hereof, then the supplier shall be reimbursed by the buyer for anyadditional costs incurred by reason of such instructions and shall berelieved of such responsibility or liability in connection with thedispute and the execution of the instructions as the expert shall decideand the time for delivery shall be extended accordingly.
21.3.6the buyer's approval, either with or without modification(s),of the document furnished by the supplier shall not relieve the supplierof any responsibility or liability imposed upon it by any provisions ofthe contract except where and to the extent that the expert upholds thesupplier's dispute of the modification(s).
21.3.7the supplier shall not depart from any approved document unlessthe supplier has first submitted to the buyer an amended document andobtained the buyer's approval thereof pursuant to the provisions of thisarticle 21.3.
if the buyer requests any change in any already approved documentand/or in any document based thereon, the provisions of article 36 (changein works)hereof shall apply to such request.
21.4design liaison
21.4.1both parties shall participate in design liaison meetings asfollows:
21.4.2within _________ month after the effective date, _________shall at its own cost dispatch its engineer to _________ to participate inthe kick-off meeting for the period of _________. at the end of thekick-off meeting the buyer and the supplier shall sign the kick-offmeeting protocol.
21.4.3within _________ month after the effective date, _________shall at its own cost dispatch its engineer to _________ to participate inthe basic design review meeting for the period of _________. at the endof the basic design review meeting the buyer and the supplier shall signthe basic design review meeting protocol.
21.4.4within _________ month after the effective date, _________shall at its own cost dispatch its engineer to _________ to participate inthe detail design review meeting for the period of _________ . at the endof the detail design review meeting the buyer and the supplier shall signthe detail design review meeting protocol.
21.4.5during the period of the design work, the buyer may send hisengineer at its own expense to the supplier's relevant design offices orshops of the equipment manufacturers to understand the relevant technicaldata relating to the supplier's design or the equipment, provided that thesupplier's works are not hindered or the relevant equipment manufactureragrees to receive the buyer's engineer. the supplier shall assist for thebuyer to arrange entry visa and sojourn formalities.
21.4.6during the performance of the works, the supplier shall answerin time the questions put forward by the buyer in connection with thedesign and technical problems in the scope of the contract.
21.4.7detailed contents, time, place and participants of the designliaison meetings are specified in appendix 7-1 (scope of works and supply)hereto.
21.5delivery of technical documents
21.5.1the technical documents shall be delivered on cpt (carriagepaid to)destination airport (in case of air cargo)or destination place(in case of special courier)in accordance with incoterms. the contents,number of copies and delivery schedule of the technical documents arestipulated in appendix 7-1 (scope of works and supply)hereto.
21.5.2not later than seven (7)days before dispatching the technical
documents, the supplier shall notify the buyer by cable/ telex/fax of the
contract number, approximate number of parcels, approximate gross weight
and expected date of arrival at _________ .
21.5.3within _________ working days after dispatching the saidtechnical documents,thesuppliershallnotifythebuyerbycable/telex/fax of;
(a)in case of air cargo the contract number, number of parcels, gross weight, dispatchingdate, flight number, and air waybill number,
(b)in case of special courier servicesthe contract number, number of parcels, gross weight, dispatching dateand cargo receipt number.
21.5.4the date of air waybill (in case of air cargo)or the date ofcargo receipt (in case of special courier services)shall be deemed to beas the actual delivery date of the technical documents.
21.5.5in case of any shortage, loss or damage caused to the technicaldocuments due to the supplier's responsibilities before the deliverythereof, the supplier shall make supplementary delivery for the partshort, lost or damaged within _________ days after receiving the buyer'snotification without any charge.
21.5.6within _________ working days after delivery of each batch oftechnical documents, the supplier shall send to the buyer the followingdocuments:

上一页  [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32]  下一页

,国际技术转让加设备进口合同
《国际技术转让加设备进口合同》相关文章